Your SwissKubik programmable watch winder can be controlled directly from your smartphone. Number of rotations, direction of rotation, night mode: every setting can be adjusted in the mobile app for truly personalised care. This guide takes you through each step, from Bluetooth pairing to troubleshooting the most common issues. Before you begin, please note that the app is designed for Masterbox and Travelbox models. Startbox operates using a predefined programme and requires no configuration.
Table of Contents:
1.Which watch winders can be configured via the app?
2.Downloading the app and pairing via Bluetooth on iOS and Android
3.Setting the number of turns per day according to the calibre
4.Choosing the direction of rotation
5.Activating night mode
6.Troubleshooting
7.FAQ
Which watch winders can be configured via the app?
Not every SwissKubik watch winder requires the app. The key differences are as follows:
- Startbox: a fixed programme of 1,600 rotations per day, with 800 turns in each direction. It is ready to use as soon as it is switched on. No app or configuration is required.
- Masterbox: a programmable watch winder with Bluetooth connectivity, which can be adjusted module by module. This is the main model covered in this guide.
- Travelbox: a travel case that is also compatible with the app.
Downloading the app and pairing via Bluetooth on iOS and Android
The SwissKubik app is available for both iOS and Android.
Once the app has been installed, pairing must be completed in a specific order. One important point to remember is that Masterbox Bluetooth remains active for only two minutes after the watch winder is switched on. It then turns off automatically to preserve battery life. Your smartphone should therefore be ready before you switch on the device.
- Open your smartphone’s Bluetooth settings before switching on the watch winder.
- Switch on your Masterbox automatic watch winder. Bluetooth will activate automatically.
- As soon as the name of your watch winder appears in the list, tap it to connect.
Should the two-minute period expire before the connection is established, switch the watch winder off and back on to reopen the pairing window.
Setting the number of turns per day according to the calibre
The number of turns per day, or TPD, indicates how many rotations the watch winder performs for the watch over a 24-hour period. With its standard setting, Masterbox completes 1,600 rotations per day: 800 in one direction and 800 in the other. This setting is suitable for most calibres. Depending on their movement, most automatic watches require between 1,000 and 1,900 turns per day.
The good news is that you do not necessarily need to know the exact figure. The app includes a database of preloaded watch profiles and recommends settings suited to your model, automatically completing the relevant parameters.
- Select or search for your watch model in the app.
- Allow the app to apply the recommended TPD setting, or enter a customised value when a specific figure is recommended by your watch manufacturer.
Please note that these values are intended to keep your watch running on time. Should your only objective be to maintain the lubrication of the movement, the setting can be reduced to just a few turns per day. The watch will no longer display the correct time, but its oils will continue to circulate throughout the mechanism.
Choosing the direction of rotation
Automatic watches do not all require the same winding direction. Some movements wind in one direction only, known as unidirectional winding, while others wind in both directions, known as bidirectional winding. The app allows you to define the direction separately for each module:
- Clockwise: rotation in the direction of the clock hands.
- Counter-clockwise: rotation in the opposite direction.
- Bidirectional or alternating: rotation alternates between both directions. This is the standard setting and is suitable for the widest range of calibres.
When in doubt, bidirectional rotation is the safest default setting. For more precise adjustment, refer to the recommendations provided by your watch manufacturer.
Activer le mode nuit
The app includes a night mode that pauses the watch winder during a defined period, typically overnight. This feature serves two purposes. It reduces noise and movement in the bedroom, while also spacing out the mechanical activity. In this way, the winding cycle reflects even more naturally the rhythm of a watch worn on its owner’s wrist.
- Activate night mode in the watch winder settings.
- Define the period during which the device should remain paused.
Troubleshooting
Below are the most common issues and the recommended solutions.
- Bluetooth will not connect. Check that Bluetooth is enabled on your smartphone. Remember that the watch winder remains discoverable for only two minutes after being switched on. Switch it off and back on to reopen the pairing window, ensuring that your smartphone’s Bluetooth settings are already displayed.
- The app does not recognise the watch winder. Make sure that both the app and your smartphone’s operating system are up to date, and that you are using the official SwissKubik app. Move the smartphone closer to the watch winder during pairing.
- The batteries run down quickly. Use 1.5 V alkaline C batteries. Duracell Procell batteries are recommended, while rechargeable batteries should be avoided. Masterbox can also be connected to the mains. It automatically detects the power supply and switches to it, thereby preserving the batteries.
FAQ
Is the SwissKubik app available on iPhone and Android?
Yes. The app is available for both iOS and Android. Make sure that you download the latest version of the official SwissKubik app.
Can a Startbox single watch winder be configured via the app?
No. Startbox operates using a fixed programme of 1,600 rotations per day and does not use the app. Only Masterbox and Travelbox models are programmable.
Do I need to know the exact number of turns required by my watch?
Not necessarily. The app recommends settings according to your watch model and automatically completes the relevant parameters. The standard setting of 1,600 turns per day is already suitable for most calibres.
Every parameter nevertheless remains fully customisable. You can freely adjust both the number and the direction of the rotations. For the exact value recommended for your watch reference, consult your watchmaker or the brand’s after-sales service.
Our watch-profile database is regularly updated and designed to be collaborative. Should you have verified information regarding a reference that has not yet been added, please feel free to send it to us. We will be delighted to include it in a future update.
